Main Product Introduction
This 6-port twin-beam antenna is engineered for operators seeking higher sector capacity, improved interference control, and more flexible site planning.
Covering both low band (698–960MHz) and high band (1710–2690MHz), it integrates ±45° dual polarization, high cross-polar isolation, and stable beam splitting to create two independent sectors within a single antenna footprint.
The integrated RET (RCU) enables precise electrical tilt adjustment via AISG 2.0/3GPP protocol, supporting daisy-chain deployment and reducing the need for tower climbs.
Its 12 × 4.3-10 female connectors, robust wind-load resistance, and UV-resistant fiberglass radome ensure reliable long-term outdoor operation.
Designed for high-power base-station environments, it supports up to 400W per port (low band) and 200W per port (high band), while maintaining low IM3 (≤–153 dBc) and VSWR <1.5 for excellent RF efficiency.
Why Choose This Antenna
- Twin-Beam Design
Creates two independent sectors, improving capacity and spectral efficiency without adding more antennas. - Integrated RET (RCU)
AISG 2.0/3GPP compliant with daisy-chain support, enabling remote electrical tilt control. - Wide Dual-Band Coverage
Supports both 698–960 MHz (low band) and 1710–2690 MHz (high band) for multi-system operations. - High Isolation & Low IM3
≥25 dB isolation and ≤–153 dBc IM3 ensure clean signals even in high-load networks. - Carrier-Grade Build Quality
Fiberglass radome, 216 km/h wind survival, and temperature range –50°C to +65°C. - Compact 6-Port Configuration
Reduces tower loading while enabling multi-band MIMO operation.
| Electrical specifications | ||||
|---|---|---|---|---|
| Frequency Range (MHz) | R1/R2-698~960×2 | |||
| 698~803 | 790~862 | 824~894 | 880~960 | |
| Polarization | ±45° | |||
| Gain at mid tilt (dBi) | 14.6 | 15.0 | 15.4 | 15.6 |
| Gain over all tilts (dBi) | 14.4±0.3 | 14.8±0.3 | 15.2±0.3 | 15.4±0.3 |
| Horizontal 3dB beamwidth (°) | 68±3 | 64±3 | 63±3 | 61±3 |
| Vertical 3dB beamwidth (°) | 11.5±0.6 | 10.5±0.4 | 10.0±0.4 | 9.4±0.5 |
| Front to back ratio (dB) Total power, ±30° | >22 | >23 | >23 | >24 |
| Cross polar ratio (dB) (at Boresight) | >15 | >16 | >16 | >16 |
| Electrical downtilt (°) | 2~12 | |||
| Sidelobe suppression (dB) (First sidelobe above main beam) | >15 | >15 | >15 | >15 |
| VSWR | ＜1.5 | |||
| Cross Polar Isolation/Intra-Cluster isolation (dB) | ≥25 | |||
| Inter-band Isolation/Inter-Cluster isolation (dB) | ≥25 | |||
| Intermodulation IM3 (2×43dBm carrier) | ≤-153 dBc | |||
| Impedance (Ω) | 50 | |||
| Efficiency | ≥70% | |||
| Max. power per input (W) @50°C | 400 | |||
| Lightning protection | Dc Ground | |||
| Electrical specifications | ||||
|---|---|---|---|---|
| Frequency Range (MHz) | Y1/Y2,Y3/Y4-1710~2690×4 | |||
| 1710~1990 | 1920~2200 | 2200~2490 | 2490~2690 | |
| Polarization | ±45° | |||
| Gain at mid tilt (dBi) (Bottom) | 17.5 | 17.9 | 18.5 | 18.4 |
| Gain over all tilts (dBi) (Bottom) | 17.3±0.5 | 17.7±0.3 | 18.3±0.3 | 18.2±0.3 |
| Gain at mid tilt (dBi) (Top) | 17.1 | 17.5 | 18.2 | 18.0 |
| Gain over all tilts (dBi) (Top) | 16.6±0.5 | 17.3±0.3 | 18.0±0.3 | 17.8±0.3 |
| Horizontal beam centers (°) | ±29 | ±27 | ±25 | ±25 |
| Horizontal 3dB beamwidth (°) | 36±1.5 | 33±1 | 32±1 | 31±1 |
| Vertical 3dB beamwidth (°) | 9.5±0.3 | 8.5±0.3 | 7.3±0.3 | 6.7±0.3 |
| Front to back ratio (dB) Total power, ±30° | >25 | |||
| Electrical downtilt (°) | 2~12 | |||
| Sidelobe suppression (dB) (First sidelobe above main beam) | >15 | |||
| VSWR | <1.5 | |||
| Cross Polar Isolation/Intra-Cluster isolation (dB) | ≥25 | |||
| Inter-band Isolation/Inter-Cluster isolation (dB) | ≥25 | |||
| Isolation beam to beam (dB) | ≥25 | |||
| Intermodulation IM3 (2×43dBm carrier) | ≤-153 dBc | |||
| Impedance (Ω) | 50 | |||
| Efficiency | ≥65% | |||
| Max. power per input (W) @50°C | 200 | |||
| Lightning protection | Dc Ground | |||
| Mechanical specifications | |
|---|---|
| Connector | 12×4.3-10 Female |
| Connector position | Bottom |
| Height × width × depth (mm | 2080×499×198 |
| Packing size (mm) | 2370×565×250 |
| Antenna weight (kg) | 38 |
| Installation kit weight (kg) | 5.4 |
| Packing weight (kg) | 52.5 |
| Wind load (N,at 150km/h) Frontal/Lateral/Rear | 740/240/950 |
| Max. wind velocity (km/h) | 216 |
| Radome material | Fiberglass, UV resistant |
| Radome color | Gray or color customized |
| Mechanical tilt (°) | 0-10 |
| Operating temperature (℃) | -50~65 |
| Mounting hardware (mm) | Ф50~Ф115 |
| Mechanical specifications | |
|---|---|
| RET type | Integrated (Replaceable) |
| RET protocol | AISG 2.0/3GPP |
| Daisy chain connection solution | Ready for daisy-chaining/cascade |
| Power supply(V) | 10-30 DC |
| Power consumption(W) | ≤0.6 (Idle,12V),≤6 (In motion,12V) |
| Adjustment time (Full Range) | ＜4Mins |
| Adjustment cycles | ＞50,000 |
| Temperature range (℃) | -40~65 |
| Lightning protection | 3KA(8/20μs) @ Pin5 & Pin3; 5KA(8/20μs) @ Pin1 / Pin6 & Pin7 |
| Connectors | 2×8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chain in:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
FAQ
Q1: What frequency bands does this antenna support?
- Low band: 698–960 MHz (R1/R2)
- High band: 1710–2690 MHz (Y1–Y4)
Q2: What is the beam structure?
Q3: Does it include RET?
Q4: What connectors are used?
Q5: What is the gain?
- Low band: 14.4–15.6 dBi
- High band: 17.1–18.5 dBi
Q6: What is the downtilt range?
Q7: What isolation levels does it provide?
Q8: What is the wind rating?
Q9: Is the antenna suitable for harsh outdoor operation?
Yes. UV-resistant radome, –50°C to +65°C operation, IP-rated outdoor design.
Quality Commitment
Why Trust Lxelec? Why Choose Our Products?
At Lxelec, we are committed to delivering only high-quality RF antenna products. Our strict quality assurance procedures ensure consistent performance and reliability in even the most demanding environments.
- Comprehensive Testing
- VSWR & Gain tested to meet specifications
- Polarization & radiation pattern verified in anechoic chambers
- Environmental tests: temperature, humidity, UV, salt spray, vibration
- Certified Quality
ISO 9001 certified quality management system
RoHS & CE compliant
Traceable serial numbers and batch control
Third-party reports available
- Durability & Reliability
Designed for 5–10 years lifespan
IP-rated waterproof and dustproof options
Stable from -40°C to +85°C
- Beyond Hardware
- Expert RF support for deployment
- Customization for gain, connectors, cables, frequency bands
- Fast, responsive after-sales service
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Recommended products
-
Beamforming Antenna | 2300–2690MHz | 90° | 17dBi | Integrated RCU | MQ4/MQ5 Connector
Base Station Antennas -
Hybrid Beamforming Antenna with TDD 2300–2690MHz
Base Station Antennas -
5G Beamforming Antenna | Hybrid FDD + TDD | 698–2690MHz
Base Station Antennas -
3.5GHz TDD Beamforming & Dual-Beam FDD Antenna with Integrated RCU
Base Station Antennas