Main Features
- Features 2 cross-polarized arrays (4 ports) for the low band (698–960 MHz) and 4 cross-polarized arrays (8 ports) for the high band (1710–2690 MHz).
- Utilizes compact 4.3-10 connectors, which are approximately 40% smaller than traditional 7/16 DIN connectors.
- A single, integrated, and field-replaceable RCU supports up to 10 RETs, enabling independent electrical tilt control for each array. Fully compliant with AISG and 3GPP standards.
| Electrical specifications | ||||
|---|---|---|---|---|
| Frequency Range (MHz) | R1/R2 -698~960 | |||
| 698~803 | 790~862 | 824~894 | 880~960 | |
| Polarization | ±45° | |||
| Gain at mid tilt (dBi) | 14.1 | 14.4 | 14.8 | 15.0 |
| Gain over all tilts (dBi) | 13.9±0.4 | 14.2±0.4 | 14.5±0.4 | 14.9±0.4 |
| Horizontal 3dB beamwidth (°) | 69±6 | 67±6 | 66±6 | 65±6 |
| Vertical 3dB beamwidth (°) | 12.1±0.8 | 11.2±0.4 | 10.7±0.4 | 9.9±0.4 |
| Front to back ratio (dB) Total power, ±30° | >21 | >22 | >23 | >23 |
| Cross polar ratio (dB) (at Boresight) | >17 | >17 | >16 | >16 |
| Electrical downtilt (°) | 2~12 | |||
| Sidelobe suppression (dB) (First sidelobe above main beam) | >16 | >16 | >16 | >16 |
| VSWR | <1.5 | |||
| Isolation: intra-system (dB) | ≥25 | |||
| Isolation: inter-system (dB) | R1//R2≥25 R1,R2//Others≥27 | |||
| Intermodulation IM3 (2×43dBm carrier) | ≤-153 dBc | |||
| Impedance (Ω) | 50 | |||
| Max. power per input (W) @50°C | 400 | |||
| Lightning protection | DC Ground | |||
| Electrical specifications | ||||||||
|---|---|---|---|---|---|---|---|---|
| Frequency Range (MHz) | Y1/Y4-1710~2690 | Y2/Y3-1710~2690 | ||||||
| 1710~1990 | 1920~2200 | 2200~2490 | 2490~2690 | 1710~1990 | 1920~2200 | 2200~2490 | 2490~2690 | |
| Polarization | ±45° | |||||||
| Gain at mid tilt (dBi) | 16.5 | 16.8 | 17.1 | 17.5 | 16.6 | 17.1 | 17.5 | 17.8 |
| Gain over all tilts (dBi) | 16.3±0.5 | 16.6±0.5 | 17.0±0.5 | 17.3±0.5 | 16.4±0.5 | 16.9±0.5 | 17.3±0.6 | 17.6±0.5 |
| Horizontal 3dB beamwidth (°) | 69±6 | 62±5 | 60±6 | 58±5 | 64±8 | 63±6 | 61±6 | 62±6 |
| Vertical 3dB beamwidth (°) | 7.0±0.6 | 6.3±0.6 | 5.5±0.6 | 5.0±0.6 | 7.0±0.6 | 6.2±0.6 | 5.5±0.6 | 5.0±0.6 |
| Front to back ratio (dB) Total power, ±30° | >26 | >25 | >26 | >25 | >25 | >25 | >26 | >25 |
| Cross polar ratio (dB) (at Boresight) | >19 | >18 | >19 | >20 | >19 | >20 | >18 | >18 |
| Electrical downtilt (°) | 2~12 | 2~12 | ||||||
| Sidelobe suppression (dB) (First sidelobe above main beam) | >15 | >16 | >16 | >16 | >16 | >16 | >16 | >16 |
| VSWR | <1.5 | <1.5 | ||||||
| Isolation: intra-system (dB) | ≥25 | ≥25 | ||||||
| Isolation: inter-system (dB) | Y1,Y4//Other≥27 | Y2//Y3≥25 Y2,Y3//Other≥ 27 | ||||||
| Intermodulation IM3 (2×43dBm carrier) | ≤-153 dBc | |||||||
| Impedance (Ω) | 50 | |||||||
| Max. power per input (W) @50°C | 200 | |||||||
| Lightning protection | Dc Ground | |||||||
| Mechanical specifications | |
|---|---|
| Connector | 12×4.3-10 Female |
| Connector position | Bottom |
| Height × width × depth (mm | 2080×499×198 |
| Packing size (mm) | 2465×620×330 |
| Antenna weight (kg) | 41 |
| Installation kit weight (kg) | 5.4 |
| Packing weight (kg) | 52.8 |
| Wind load (N,at 150km/h) Frontal/Lateral/Rearside | 1100/325/1240 |
| Max. wind velocity (km/h) | 216 |
| Radome materia | Fiberglass |
| Radome color | Gray |
| Mechanical tilt (°) | 0-10 |
| Operating temperature (℃) | -50~65 |
| Mounting hardware (mm) | Φ50~Φ115 |
| Integrated RET properties | |
|---|---|
| RET type | Integrated RCU |
| RET protocol | AISG 2.0/3GPP |
| Power supply(V) | 10-30 DC |
| Power consumption(W) | ≤0.6 (Idle,12V),≤6 (In motion,12V) |
| Adjustment time (Full Range) | ＜4Mins |
| Adjustment cycles | ＞50,000 |
| Temperature range (℃) | -40~65 |
| Lightning protection | 3KA(8/20μs) @ Pin5 & Pin3; 5KA(8/20μs) @ Pin1 / Pin6 & Pin7 |
| Connectors | 2×8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chain in:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
Quality Commitment
Why Trust Lxelec? Why Choose Our Products?
At Lxelec, we are committed to delivering only high-quality RF antenna products. Our strict quality assurance procedures ensure consistent performance and reliability in even the most demanding environments.
- Comprehensive Testing
- VSWR & Gain tested to meet specifications
- Polarization & radiation pattern verified in anechoic chambers
- Environmental tests: temperature, humidity, UV, salt spray, vibration
- Certified Quality
ISO 9001 certified quality management system
RoHS & CE compliant
Traceable serial numbers and batch control
Third-party reports available
- Durability & Reliability
Designed for 5–10 years lifespan
IP-rated waterproof and dustproof options
Stable from -40°C to +85°C
- Beyond Hardware
- Expert RF support for deployment
- Customization for gain, connectors, cables, frequency bands
- Fast, responsive after-sales service
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Recommended products
-
698–2690MHz Multi-Band Panel Antenna with 4.3-10 & RCU
Base Station Antennas -
16-Port Outdoor Antenna, 694-2690MHz, 16dBi, Tilt 2°-12°
Base Station Antennas -
14-Port BTS Sector Antenna 698-2690MHz with RCU
Base Station Antennas -
16-Port Base Station Antenna with Remote Tilt
Base Station Antennas