Features
- Supports TDD beamforming in the 3.5GHz band (3300–3800MHz).
- Equipped with MQ4/MQ5 cluster connectors for the beamforming array, featuring 8 RF ports and 1 calibration port.
- Integrated and field-replaceable RCU enables up to 10 independent RETs per array, fully compliant with AISG and 3GPP standards.
| Electrical Specifications-TDD | |||
|---|---|---|---|
| General Parameters | Frequency range(MHz) | 3300~3800 | |
| Polarization | ±45° | ||
| Electrical downtilt(°) | 2~12 | ||
| Electrical downtilt tolerance(°) | ±1 | ||
| Calibration and Electrical Parameters | Coupling factor between calibration port and each antenna port(dB) | -26±2 | |
| Max.amplitude tolerance from calibration port to input ports(dB) | ＜0.9 | ||
| Max.phase tolerance from calibration port to input ports(°) | ≤9 | ||
| Ports VSWR | ≤1.5 | ||
| Co-polarization isolation between ports(dB) | ≥20 | ||
| Cross-polarization isolation between ports(dB) | ≥22 | ||
| Inter array spacing(mm) | 57(0.67λ@3550MHz) | ||
| Radiation Parameters | |||
| Single Column Beam | |||
| Horizontal 3dB beam width(°) | 70±15 | ||
| Gain(dBi) | 15.7±0.5 | ||
| Vertical 3dB beam width(°) | 6.0±0.8 | ||
| Cross polar ratio(0°)(dB) | ≥15 | ||
| Front to back ratio(dB) | ≥23 | ||
| Vertical sidelobe suppression for first sidelobe above main beam(dB) | ≥15 | ||
| Broadcast Beam | |||
| Gain(dBi) | 16.5±0.8 | ||
| SPR(±60°)(%) | ≥90 | ||
| Vertical 3dB beam width(°) | 6.0±0.8 | ||
| Front to back ratio(dB) | ≥25 | ||
| Service Beam | 0° direct beam gain(dBi) | 20.8±0.8 | |
| 0° direct beam horizontal 3dB beam width(°) | 19±3 | ||
| 0° direct beam sidelobe suppression(dB) | ≥10 | ||
| 0° direct beam cross polar ratio(axial)(dB) | ≥18 | ||
| 0° direct beam front to back ratio(dB) | ≥25 | ||
| ±30° direct beam gain(dBi) | 18±1 | ||
| Electrical specifications | ||||
|---|---|---|---|---|
| Frequency Range (MHz) | R1/R2：698~960×2 | |||
| 698~803 | 790-862 | 824~894 | 880~960 | |
| Polarization | ±45° | |||
| Gain at mid tilt (dBi) | 15.0 | 15.2 | 15.3 | 15.5 |
| Gain over all tilts (dBi) | 14.8±0.6 | 15.0±0.6 | 15.1±0.6 | 15.3±0.6 |
| Horizontal 3dB beamwidth (°) | 68±3 | 66±3 | 65±3 | 63±5 |
| Vertical 3dB beamwidth (°) | 10.0±0.3 | 9.6±0.4 | 9.5±0.3 | 8.5±0.5 |
| Front to back ratio (dB) Total power, ±30° | >22 | >23 | >23 | >24 |
| Cross polar ratio (dB) (at Boresight) | >17 | >18 | >17 | >17 |
| Electrical downtilt (°) | 2~12 | |||
| Sidelobe suppression (dB) (First sidelobe above main beam) | >16 | >16 | >16 | >15 |
| VSWR | ＜1.5 | |||
| Isolation: intra-system (dB) | ≥25 | |||
| Isolation: inter-system (dB) | ≥25（R1//R2） ≥26（R1,R2//Y1,Y2,Y3,Y4 | |||
| Intermodulation IM3 (2×43dBm carrier) | ≤-150 dBc | |||
| Impedance (Ω) | 50 | |||
| Max. power per input (W) @50°C | 400 | |||
| Lightning protection | Dc Ground | |||
| Electrical specifications | ||||
|---|---|---|---|---|
| Frequency Range (MHz) | Y1/Y2,Y3/Y4: 1710~2690×4 | |||
| 1710~1990 | 1920~2200 | 2200~2490 | 2490~2690 | |
| Polarization | ±45° | |||
| Gain at mid tilt (dBi) | 16.3 | 16.9 | 17.0 | 17.1 |
| Gain over all tilts (dBi) | 16.1±0.8 | 16.7±0.8 | 16.8±0.8 | 16.9±0.8 |
| Horizontal beam centers (°) | ±28 | ±26 | ±24 | ±22 |
| Horizontal 3dB beamwidth (°) | 33±3 | 30±3 | 29±3 | 27±3 |
| Vertical 3dB beamwidth (°) | 8.8±0.6 | 8.0±0.8 | 7.6±0.8 | 7.4±0.8 |
| Front to back ratio (dB) Total power, ±30° | >25 | >25 | >25 | >25 |
| Electrical downtilt (°) | 2~12 | |||
| Sidelobe suppression (dB) (First sidelobe above main beam) | >16 | >16 | >16 | >15 |
| VSWR | <1.5 | |||
| Isolation: intra-system (dB) | ≥25 | |||
| Isolation: inter-system (dB) | ≥15（beam to beam， 1710~2690//1710~2690） | |||
| Intermodulation IM3 (2×43dBm carrier) | ≤-150 dBc | |||
| Impedance (Ω) | 50 | |||
| Max. power per input (W) @50°C | 200 | |||
| Lightning protection | Dc Ground | |||
| Mechanical specifications | |
|---|---|
| Connector | TDD:1×(MQ4+M5)Connector-Male FDD:12×4.3-10-Female |
| Connector position | Bottom |
| Height × width × depth (mm | 2080×550×198 |
| Packing size (mm) | 2370×655×250 |
| Antenna weight (kg) | 44 |
| Installation kit weight (kg) | 8.7 |
| Packing weight (kg) | 61.5 |
| Wind load (N,at 150km/h) Frontal/Lateral/Maximum | 1100/325/1240 |
| Max. wind velocity (km/h) | 216 |
| Radome material | Fiberglass |
| Radome color | Gray |
| Mechanical tilt (°) | 0-10 |
| Operating temperature (℃) | -50~65 |
| Mounting hardware (mm) | Ф50~Ф115 |
| Mechanical specifications | |
|---|---|
| RET type | Integrated (Replaceable) |
| Calibration port | Yes |
| RET protocol | AISG 2.0/3GPP |
| Power supply(V) | 10-30 DC |
| Power consumption(W) | ≤0.6 (Idle,12V),≤6 (in Motion,12V) |
| Adjustment time (Full Range) | ＜4Mins |
| Adjustment cycles | ＞50,000 |
| Temperature range (℃) | -40~65 |
| Lightning protection | 3KA(8/20μs) @ Pin5& Pin3; 5KA(8/20μs) @ Pin1/ Pin6& Pin7 |
| Connectors | 2×8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chain in:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
| Technical requirements | The manufacturer of the supplied antennas is one of the Participants in the development of technical requirements forNP-BASTA sectoral antennas (https://www.ngmn.org/aboutus/our-partners.html). Full adherence to the recommendations from NGMN when testing antennas described in: “Recommendation on Standards for Passive Base Station Antennas v 12.” |
Quality Commitment
Why Trust Lxelec? Why Choose Our Products?
At Lxelec, we are committed to delivering only high-quality RF antenna products. Our strict quality assurance procedures ensure consistent performance and reliability in even the most demanding environments.
- Comprehensive Testing
- VSWR & Gain tested to meet specifications
- Polarization & radiation pattern verified in anechoic chambers
- Environmental tests: temperature, humidity, UV, salt spray, vibration
- Certified Quality
ISO 9001 certified quality management system
RoHS & CE compliant
Traceable serial numbers and batch control
Third-party reports available
- Durability & Reliability
Designed for 5–10 years lifespan
IP-rated waterproof and dustproof options
Stable from -40°C to +85°C
- Beyond Hardware
- Expert RF support for deployment
- Customization for gain, connectors, cables, frequency bands
- Fast, responsive after-sales service
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Recommended products
-
698–960MHz & 1710–2690MHz Sector Dual-Beam Antenna | RET RCU
Base Station Antennas -
TDD + FDD Multi-Band Beamforming Antenna| RET + MQ4/MQ5
Base Station Antennas -
698-2690MHz Multi-Port Antenna | 65° & Dual-Beam 33° | RET RCU Integrated
Base Station Antennas -
Low & High Band Cellular Antenna | 10/13dBi | 65° Beam | Combiner Inside
Base Station Antennas