Main Features
Extended spectrum compliance for703-2170MHz
Uses the new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
LowPassive Inter-modulation
Application Scenarios
- 4G/5G Macro Cell Deployments — Urban and suburban high-density networks
- Private LTE/5G Systems — Enterprise and campus networks requiring robust outdoor coverage
- Industrial Wireless Applications — Energy plants, mining zones, and logistics hubs
- Carrier Infrastructure Sharing — Co-located networks using high-capacity antennas
Installation Guidelines
- Pole or Tower Mounting (Ø40–Ø115 mm)
- 14x 4.3‑10 female connectors — bottom-fed, weather-sealed
- Requires grounding; follow torque specs in datasheet
Frequently Asked Questions
Q1: Is this antenna for private LTE networks?
A: Yes, the 703–2170 MHz frequency range includes Band 28 and Band 8, commonly used in private LTE systems.
Q2: What is the beamwidth?
A: Typically 65° or 90°, supporting sector coverage for macro deployment.
Q3: What about environmental specs?
A: The antenna features rugged, IP65-rated radome and is designed to withstand industrial outdoor conditions.
| Technical Specifications | |||||
|---|---|---|---|---|---|
| Frequency range (MHz) | R1/R2-(703-803/905-960)×2 | R3-824-884 | B1/B3-1710-1880 | B2/B4-1920-2170 | |
| 703-803 | 905-960 | 824-884 | 1710-1880 | 1920-2170 | |
| Polarization | ±45° | ||||
| Gain over all tilts (dBi) | 16.6±1 | 17.0±1 | 16.8±1 | 17.5±1 | 17.5±1 |
| Horizontal 3dB beamwidth(°) | 69±7 | 65±6 | 67±6 | 65±6 | 63±6 |
| Vertical 3dB beamwidth() | 9.1±0.5 | 7.5±0.5 | 8.3±0.5 | 7.4±0.6 | 6.4±0.5 |
| Front to back ratio (dB) Total power,±30° | ≥26 | ≥26 | ≥26 | ≥26 | ≥26 |
| Cross polarratio (dB) (at Boresight) | ≥15 | ≥15 | ≥15 | ≥15 | ≥15 |
| Electrical downtilt () | 2~10 | 2~10 | 2~12 | 2~12 | |
| Sidelobe suppression(dB) (First sidelobe above main beam) | ≥15 | ≥15 | ≥15 | ≥15 | ≥15 |
| VSWR | <1.5 | ||||
| Isolation:intra-system (dB) | ≥25 | ||||
| Isolation:inter-system (dB) | ≥80(703~803/824~884) ≥80(703~803/905~960) ≥90(824~884/905~960) | ≥30 | |||
| Intermodulation IM3 (2×43dBm carrier) | ≤-150 dBc | ||||
| Impedance (Q) | 50 | ||||
| Max.power per input (W)@50℃ | 350 | ||||
| Lightning protectior | Dc Ground | ||||
| Mechanical Specifications | |
|---|---|
| Connector | 14×4.3-10-Female |
| Connector position | Bottom |
| Height ×width×depth (mm) | 2680×446×205 |
| Packing size (mm) | 2835×510×255 |
| Antenna weight (kg) | 44.5 |
| Installation kit weight(kg) | 8.7 |
| Packing weight (kg) | 54 |
| Wind load (N,at 150km/h) Frontal/Lateral/Rearside | 1433/447/1602 |
| Max.wind velocity (km/h) | 216 |
| Radome material | Fiberglass |
| Radome color | Gray |
| Mechanical tilt(°) | 0~8 |
| Operating temperature(℃) | -50~65 |
| Mounting hardware(mm) | φ50~φ115 |
| Integrated RET Properties | |
|---|---|
| RET type | Integrated(Replaceable) |
| RETprotocol | AISG 2.0/3GPP |
| Powersupply(V) | 10-30 DC |
| Power consumption(W) | ≤0.6 (Idle,12V),≤6(In motion,12V) |
| Adjustment time (Full Range) | <4Mins |
| Adjustment cycles | >50,000 |
| Temperature range(℃) | -40~65 |
| Lightning protection | 3KA(8/20μs)@Pin5 &Pin3; 5KA(8/20μs)@Pin1/Pin6 &Pin7 |
| Connectors | 2×8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chainin:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
Quality Commitment
Why Trust Lxelec? Why Choose Our Products?
At Lxelec, we are committed to delivering only high-quality RF antenna products. Our strict quality assurance procedures ensure consistent performance and reliability in even the most demanding environments.
- Comprehensive Testing
- VSWR & Gain tested to meet specifications
- Polarization & radiation pattern verified in anechoic chambers
- Environmental tests: temperature, humidity, UV, salt spray, vibration
- Certified Quality
ISO 9001 certified quality management system
RoHS & CE compliant
Traceable serial numbers and batch control
Third-party reports available
- Durability & Reliability
Designed for 5–10 years lifespan
IP-rated waterproof and dustproof options
Stable from -40°C to +85°C
- Beyond Hardware
- Expert RF support for deployment
- Customization for gain, connectors, cables, frequency bands
- Fast, responsive after-sales service
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Recommended products
-
698-960MHz/1710-2690MHz Dual-Beam 16.5/19.5dBi Panel Antenna
Base Station Antennas -
1710~2690MHz Triple Beam 21.5dBi Panel Antenna
Base Station Antennas -
400-430MHz Low PIM Panel Antenna with N Female Connector
Low-Frequency Bands -
High Gain 8/12dBi Sector Panel Antenna with N-Female Connector
Base Station Antennas