Main Product Introduction
The LX-4965-NF-32D is a high-precision RF solution for operators requiring the highest possible link budget for distant sites. By utilizing a large 0.9-meter aluminum reflector, the antenna generates a concentrated 5-degree “pencil beam” that maximizes signal energy over dozens of kilometers while effectively ignoring ambient RF noise. Its wideband design covers from 4.9GHz up to the new 6.5GHz extended WiFi and 5G frequencies, providing a future-proof investment for network infrastructure.
Built for durability in extreme environments, the dish is constructed from lightweight yet rigid aluminum, finished in a weather-resistant white coating. The dual-polarization (Vertical/Horizontal) capability allows for 2×2 MIMO operation, enabling the highest modulation rates and throughput when paired with modern high-speed radios. The robust mounting hardware supports poles from 50mm to 75mm, ensuring the antenna remains precisely aligned even under significant wind loads. With integrated DC grounding for lightning protection, the LX-4965-NF-32D is a reliable cornerstone for any outdoor long-range wireless project.
| Specifications | |
|---|---|
| Category | 5G 100W 4900-6500MHz MHz Mimo Dish 32dBi Parabolic Antenna |
| Frequency -MHz | 4900-6500MHz |
| Gain-dBi | 32dBi |
| VSWR | ≤2.0 |
| Polarization | Vertical or Horizontal |
| Isolation | ≥30 |
| Front to Back Ratio | ≥35 |
| Horizontal Beam width | 5° |
| Vertical Beam width | 5° |
| Maximum Power Per Port | 100W |
| Impedance | 50Ω |
| Lighting protection | DC Ground |
| Connector | N female |
| Antenna Size | φ0.9 m |
| Antenna Weight | 5.5kg |
| Antenna color | white |
| Dish material | aluminum |
| Diameter of the Pole | Φ50 to φ75 mm |
Application Scenarios
- Ultra-Long Range Backhaul: Connecting remote infrastructure nodes over 20+ km distances with high-speed data links.
- 5G & 6GHz Wireless Bridges: High-capacity PtP connectivity for campus networks, rural broadband, and industrial IoT.
- WISP Infrastructure: Providing the primary data trunk for Wireless Internet Service Providers in high-interference areas.
- Disaster Recovery: Rapidly deploying high-bandwidth communication links between emergency command centers and remote outposts.
Product Q&A
- Q: Why is a 0.9m dish with 32dBi gain necessary?
- A: For long-range wireless links, signal loss increases significantly with distance. A 32dBi gain provides the extra “punch” needed to maintain high-speed modulation over vast distances (e.g., across valleys or between towers) where smaller 23-25dBi antennas would fail to maintain a stable link.
- Q: Does this antenna support the new WiFi 6E/6GHz bands?
- A: Yes. Its frequency range extends to 6500MHz, which fully covers the 6GHz spectrum. This allows you to deploy the latest high-bandwidth WiFi 6E and 5G equipment without needing to replace your antenna infrastructure.
- Q: What is the benefit of the ≥35dB Front-to-Back ratio?
- A: A high Front-to-Back ratio means the antenna is extremely directional and does not pick up noise from behind the dish. This is critical for co-location sites where multiple antennas are mounted on the same tower, as it prevents self-interference.
- Q: How does the 5.5kg weight affect installation?
- A: At only 5.5kg, the LX-4965-NF-32D is remarkably lightweight for a 0.9m dish. This makes it easier for tower climbers to handle during installation and reduces the mechanical load on the mounting pole compared to heavier steel dishes.
Quality Commitment
Why Trust Lxelec? Why Choose Our Products?
At Lxelec, we are committed to delivering only high-quality RF antenna products. Our strict quality assurance procedures ensure consistent performance and reliability in even the most demanding environments.
- Comprehensive Testing
- VSWR & Gain tested to meet specifications
- Polarization & radiation pattern verified in anechoic chambers
- Environmental tests: temperature, humidity, UV, salt spray, vibration
- Certified Quality
ISO 9001 certified quality management system
RoHS & CE compliant
Traceable serial numbers and batch control
Third-party reports available
- Durability & Reliability
Designed for 5–10 years lifespan
IP-rated waterproof and dustproof options
Stable from -40°C to +85°C
- Beyond Hardware
- Expert RF support for deployment
- Customization for gain, connectors, cables, frequency bands
- Fast, responsive after-sales service
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Recommended products
-
High Gain 1710-4200MHz 22dBi MIMO Mesh Parabolic Antenna
High-Frequency Bands -
High Gain 1710-2700MHz 24dBi MIMO Parabolic Grid Antenna
Mid-Frequency Bands -
700-4000MHz 30dBi MIMO Parabolic Grid Antenna for 5G Outdoor
High-Frequency Bands -
5.4-6.2GHz MIMO Panel Parabolic Dish Antenna (N Female)
High-Frequency Bands